Kenwood DPX-5200M
| Name | DPX-5200M |
|---|---|
| Manufacturer | Kenwood |
| Released | 2002/05 |
| Device type | auto |
| Recorder | Player |
| MDLP | Yes |
| NetMD | No |
| Hi-MD | No |
| Radio | Yes |
| Dimensions | 178 (W) x 100 (H) x 155 (D) mm |
| Weight | 2300 |
| ATRAC ver | |
| Battery | No |
| Sidecar battery | No |
| Voltage | 12 |
| Power cable | |
| Price (launch) | |
| ¥52 500 |
|
| - | |
| Inputs | CD |
| Outputs | Speaker amplifier |
| Control |
Equipped with “multitask LSI type Q” A hybrid IC that integrates an electronic volume and a 3-band parametric equalizer (New dB equalizer). By integrating the functions that affect sound quality into a single chip, it is strong against internal and external noise and minimizes deterioration of sound quality.
Built-in EASY DSP Various sound field effects can be obtained in 6 patterns of SFC (Hall Simulation) by EASY DSP.
Other features
- MDLP compatible
- Supports CD-R / RW playback
- RCA 1PRE OUT output
- Remote control compatible
- 47W x 4 built-in amplifier installed (SEPARATE POWER IC configuration)
[MD part]
- Frequency characteristics: 20Hz-20kHz (± 1dB)
- S / N ratio: 90dB (1kHz)
- Dynamic range: 90dB
- Stereo separation: 85dB
[CD part]
- Frequency characteristics: 10Hz-20kHz (± 1dB)
- S / N ratio: 93dB (1kHz)
- Dynamic range: 93 dB
- Stereo separation: 85dB
[FM section]
- Reception frequency range: 76.0MHz-90.0MHz (100kHz step)
[Audio section]
- Maximum output: 47W x 4
- Rated output: 29W x 4 (4Ω, 1kHz, 10% THD)
- Pre-out level: 1500mV (FM / 10kΩ)
Content adapted from: User manual Kenwood Press Release
